Workshop Used Travelling Eot Wireless Remote 2 Ton Bridge Crane

Workshop Used Travelling Eot Wireless Remote 2 Ton Bridge Crane

Wireless remote 2 ton bridge crane Erection : (1) wireless remote 2 ton bridge crane belonging to large-scale equipment, installation, and erection work shall be carried out by professional departments. If the factories and mines have installation conditions, they may also install and erect...

Send InquiryChat Now
Product Details

eot-overhead-crane3


Wireless remote 2 ton bridge crane Erection :

(1) wireless remote 2 ton bridge crane belonging to large-scale equipment, installation, and erection work shall be carried out by professional departments. If the factories and mines have installation conditions, they may also install and erect themselves.

(2) The erection of the crane shall be erected or erected in accordance with the capacity of the lifting equipment.

(3) Before installation, the quality of the track installation should be checked strictly according to the following requirements, and the actual measurement results should be installed in the equipment file.

The joint of the 1 track can be straight or can be made into a 450-angle slant joint, which can make the wheel transition in the joint operation.

2 track joint joints, generally 1 ~ 2mm, in cold areas, or when the installation temperature is lower than the annual use temperature and the difference is above 20 °C, should consider the temperature gap, take 4 ~ 6mm is appropriate.

3 anti-drop limit device, in order to prevent the crane from derailing from both ends, at the end of the track (four places in total), a firm shelf should be set.

4 The lateral misalignment and height difference of the two tracks at the joint shall not exceed 1mm.

5 Two orbits, the height difference of the track in each section of the span direction shall not exceed 10 mm at the column; and shall not exceed 15 mm at the non-column.

6 On the same side track surface, the elevation between the elevation between the two columns and the elevation of the adjacent column shall not exceed B/1500 (B is the column spacing unit mm) but the maximum shall not exceed 10 mm.

7 spans:

a, span error.

b. Center error between the center of the track and the load beam.

c, track non-straightness error, shall not exceed the provisions of Table 11

8 The distance between the two ends of the cart track 1.4 ~ 2.5 meters (specific data determined by the general map) should be installed on the cart travel switch touch iron.

2222222222222222222222


Welcome to consult workshop used travelling eot wireless remote 2 ton bridge crane price and quotation with Henan Dowell Crane Co.,Ltd, which is one of the leading workshop used travelling eot wireless remote 2 ton bridge crane manufacturers and suppliers in China, and we can offer you customized products.
Hot Tags: workshop used travelling eot wireless remote 2 ton bridge crane China, manufacturers, suppliers, customized, quotation, offer, price
Related Products
Inquiry