3 Ton Wall Cantilever Jib Crane
Rated Lifting Moment: Customizable
Hoisting Mechanism: Wire rope/ chain rope electric hoist
Lifting Height: Customer's requirements
Control Method: Remote control
After Warranty Service: Video technical support
Color: Customized
Condition: New
Warranty: 5 Years
Place of Origin: Henan, China
Description
3 Ton Wall Cantilever Jib Crane Description
A wall cantilever jib crane is a type of crane that is designed to provide hoist coverage and rotation in areas where there is limited space or overhead obstructions. It is typically mounted on a wall or column and extends horizontally to lift and move loads within its range.
3 Ton Wall Cantilever Jib Crane parameter
| BZ/BZD | |||||||||
| Capacity | Tons | 0.25 | 0.5 | 2 | 5 | 10 | 13 | 16 | 20 |
| Arm length | M | Max.18m | |||||||
| Hoisting height | M | 3,6,9,12 20 | |||||||
| Hoisting speed | M/MIN | 8,8/0.8,7,7/0.7,3.5,3.5/3.5 | |||||||
| Travel speed | M/MIN | 20,30 | |||||||
| Rotating speed | M/MIN | 0.5r/min | |||||||
| Rotating degree | degree | 360 | |||||||
| Wirerope | Dia.(mm) | 3.6 | 4.8 | 7.4 | 10 | 13 | 16 | 17.5 | 22.5 |
| Spec. | 6x39 | 6x37+FC | |||||||
| Power | AC 220-690V,50/60HZ | ||||||||
3 Ton Wall Cantilever Jib Crane drawing
3 Ton Wall Cantilever Jib Crane features
- Hoist Coverage and Rotation: The wall cantilever jib crane provides hoist coverage and can rotate up to 200 degrees, allowing for efficient lifting and positioning of loads.
- Maximum Lift Capacity: The crane is designed to provide maximum lift capacity for the hoist, as it can be installed close to the underside of the lowest ceiling obstruction.
- Bronze Bushings and Thrust Washers: The fittings of the crane are equipped with bronze bushings and oil-impregnated bronze thrust washers, which facilitate smooth rotation and superior load positioning .
- Fabricated Steel Fittings: The crane's fittings are made of fabricated steel, providing excellent torsional rigidity.
- Welded or Bolted Mast/Boom Connection: Depending on the bracket center dimension, the mast/boom connection of the crane can be either welded or bolted. Welded connections are used for bracket centers of 6' 0" or less, while bolted connections are used for larger cranes, allowing for ease of handling during shipping and installation .
- Grease Fittings: The crane is equipped with grease fittings for easy field lubrication.
Hot Tags: 3 ton wall cantilever jib crane China, manufacturers, suppliers, customized, quotation, offer, price
Send Inquiry
You Might Also Like
