Competitive Rotary Luffing Jib Crane with Slewing Arm
Jib Crane, Slewing Crane, Column Mounted manufacturer / supplier in China, offering Competitive Rotary Luffing Jib Crane with Slewing Arm, High-Quality Wire Rope Electric Winch for Sale, High Efficiency Wire Rope Electric Winch for Sale and so on.
|Condition: New||Type: Small Crane|
|Lifting Weight: 0.25~5t||Lifting Height: 5m|
|Working Temperature: -25~+40。 C||Electrical Parts Brand: Simens, Schneider, Chnt|
|Warranty: 2 Years||Sling Type: Wire Rope|
|Power Source: Electric||Installation: Assembled|
|Specification: CE, CCC||HS Code: 84263000|
|Certification: CE, ISO9001: 2000||Application: Construction Usage, Workshop Usage, Container Usage, Mineral Area Usage|
|Span: 4.5~6m||Working Duty: A3~A5|
|Protection Device: Limit Switch, Main Isolating Switch||Control Mode: Cabinet/ Pendent/ Remote Control|
|Tower Crane Type: Slewing Tower Crane||Main Girder Form: Single Girder|
1. Products Introduction
BZ Type Pillar Jib Cranes are a cost-saving addition to integrated handling systems. In some cases, this handling equipment is often the most economical solution. This applies to storage yards, on loading ramps or in buildings where other equipment cannot be installed due to structural limitations.
BZ Type Pillar Jib Crane (up to 1000 kg)
Slewing cranes feature high load capacities and outreach in relation to their deadweight. The low weight enables the jib to be moved easily and the use of hollow section rail as the crane girder provides for very low travel forces.
BZ Type Pillar Jib Crane (up to 2000 kg)
The light-weight design and low-headroom jib make this pillar-mounted slewing jib crane suitable for universal applications in the medium load range up to 2000 kg.
BZ Type Pillar Jib Cranes are also available in low-headroom design
The low headroom dimension results in a lifting height gain of 290 mm compared to the standard design. Whether for low-headroom applications, modernization measures or changes in the use of the building, our "short" units are the perfect solution in many cases.
2. Technical Specification
|Max. Lifting height||M||3||3||3||4||4|
|Max. Horizontal throw||M||2.6||3~4||2.9~3.9||3.8||3.7|
|Max. Radius of gyration||M||3.6||4~5||4~5||5||5|
|Max. Rotation moment||T/M||3||6||12||18||27|
|Angle of revolution||Degree||360|
|Angle of revolution speed||m/min||1||0.75||0.7||0.9||0.6|