20 Ton Double Girder Overhead Bridge Crane

The drive of the hoisting system: the power source of the hoisting mechanism is issued by the electric motor.

Gear coupling, compensation shaft, brake wheel coupling, high-speed shaft that transmits power to the reducer end, and after the reducer reduces the high number of revolutions of the motor to the required number of revolutions,

Low-speed shaft output, through the inner ring gear on the reel, the power is transmitted to the reel set, and then through the steel

The wire rope and the pulley block are lifting hooks for lifting and lifting the heavy objects.

Large-car operation The transmission of the system: the power is sent by the electric motor, through the brake wheel coupling, make up

The shaft and the half-tooth coupling transmit power to the high-speed shaft end of the reducer and are powered by the reducer

After the high number of revolutions of the motive is reduced to the required number of revolutions, it is output by the low speed shaft of the reducer, and

The full-tooth coupling is coupled with the active wheel axle of the cart, which drives the rotation of the active wheel of the cart and completes the longitudinal lifting of the weight of the bridge. The drive mechanism at both ends of the cart is the same.