What Aspects Should Be Paid Attention To in The Use Of 2t Jibcrane

Attention should be paid to the use of 2-ton cantilever cranes. As a commonly used crane equipment, electric cantilever cranes must have a rigorous attitude and careful observation during use, so as to avoid accidents and reduce cost investment. So, what should you pay attention to when using a 2 ton jib crane?

1. The operator of the 2-ton jib crane should check whether there are any faults in the switch button and wire rope limit before use. If there is any problem, it must be repaired in time before it can be used. After use, the power switch must be turned off before leaving.

2. The 2-ton jib crane should concentrate on lifting the workpiece, and put both hands on the operation switch so as to brake at any time. It is not allowed to chat or eat while lifting to avoid danger.

3. When lifting any workpiece, be sure to try to lift it. The hook must be vertical. If it is found to be unbalanced, adjust the hook in time. It is not allowed to hang it obliquely. Try lifting again to keep the workpiece stable before lifting.

4. It is not allowed to overload the lifting, and the lifting of any workpiece is not allowed to exceed 500kg, otherwise it will be severely punished according to the violation of the operating regulations.

5. When lifting the workpiece, it is not allowed to be too high from the ground, it should be about half the height of a person, if there is an object that crosses it, it should be careful not to collide, and it is forbidden to lift across the machine tool.

6. When hoisting any workpiece, pay attention to the operation status at any time, stop the hoisting immediately when there is abnormal sound or abnormal phenomenon, and report it in time for processing. If you work with a disease, you will be severely punished according to the violation of the operating regulations.

7. All surprise repairs are strictly prohibited when the electric cantilever crane is in use.

8. When not in use, the 2-ton cantilever crane should be placed in a safe place, and it is not allowed to obstruct the running route of other lifting equipment, and it is not allowed to park at will, otherwise it will be punished as a violation of operating regulations.

The operation of the 2-ton cantilever crane must be carried out in accordance with the rules, and the operation cannot be violated, otherwise it will cause serious consequences. Some protective devices for the installation must also meet the corresponding technical requirements.

For the convenience of transportation, the 2-ton cantilever crane adopts disassembled packaging. Lifortin cranes are responsible for the installation, and users can also install them by themselves according to the introduction method of the Lifortin crane manual.

Another light crane produced by Lifuting Crane: the mobile 2-ton cantilever crane is more flexible and adaptable, and it is a necessary separate emergency hoisting equipment for high-efficiency automatic production lines. With it, it can ensure the smooth flow of the production line unimpeded.

The operation test of the electric cantilever crane is an inspection item required for a newly installed crane, or a cantilever crane that has been overhauled and modified, and can also be used as a condition inspection item. The purpose of the running test is to test the 2-ton cantilever crane:

1. Whether it conforms to the design drawings and relevant technical documents.

2. Whether the installation of the electrical circuit is correct and whether the action of the controller is normal.

3. Whether the riveting and welding quality of metal structural parts is good, and whether the structural parts have sufficient strength and rigidity.

4. Whether each brake device, limit device, and safety device works reliably, and whether the action is sensitive and accurate.

5. Whether the mechanical transmission parts in each mechanism are stable and the sound is normal.

6. Whether the temperature of electrical parts is normal during work.

7. Whether the oil circuit of centralized lubrication is smooth.

The specifications of all 2-ton jib cranes have a common advantage: light weight, long jib, large lifting capacity, and simple installation, operation, and maintenance. The electric jib crane is an ideal job crane and is suitable for outdoor freight yards and loading platforms.