Double Girder Overhead Crane manufacturers
Eot Crane, Double Girder manufacturer / supplier in China, offering Double Beam Overhead Crane, Double Girder Overhead Crane manufacturers
Description
Products Description
Double girder crane operating room has three types: open, closed and heat preservation. Double girder crane operating room platform entrance has three types: side, end and top. H is the height of the trolley buffer. Double girder crane has two types: indoor and outdoor. When ordering, the highest and lowest temperatures of the working environment and the type of power supply and other technical requirements should be indicated. Overload limiter, large screen display and various protection devices are added to further increase the safety during use.
comparison of product parameters
| Model NO.: QD | Condition: New | Maximum Lifting Height: >40m | Main Girder Form: Double Girder Overhead Crane manufacturers |
| Lifting Speed: 0~15 M/Min | Lifting Height: 6~100m | Certification:CE, ISO, GSG | Operation Form: Cabin |
| Maximum Lifting Weight: >200t | Traveling Speed: 0~60 M/Min | Trademark: DOWELL CRANE | Origin: Henan, China |
The trolleys have all passed the test run at the manufacturer. Therefore, they can be directly installed on the bridge after slight adjustments to eliminate the transportation deformation. When the bridge installation meets the relevant technical conditions, the trolley shall not have three legs (that is, only three of the wheels of the trolley are in contact with the track, and the other one is suspended). Otherwise, pads should be added under the bearing box of the suspended wheel or under the track for adjustment. The pads can only be one layer. When adding pads under the track, they must be placed on the main beam rib plate and fixed with spot welding at both ends.
Design Advantages
The double-beam bridge crane pioneered the honeycomb beam design, which has the characteristics of light weight, large load and strong wind resistance.
The unique steel pin connection is not only strong and reliable, but also saves assembly time.
Flexible rod legs, can be disassembled into single pieces for on-site steering, easy to transport.
The smallest installed capacity solves the problem of electricity use in field construction.
The operating room of double-girder bridge crane has three types: separate type, closed type and heat-insulated type.
The entrance to the control room platform of a double-beam overhead crane is divided into three types: side, end and top.
H is the height added by the trolley buffer.
Double beam bridge cranes are divided into indoor and outdoor types. When ordering, the highest and lowest temperatures of the working environment and the type of power supply and other technical requirements should be specified.
The addition of an overload limiter, a large-screen display and various protection devices further increases safety during use.
Double girder bridge cranes are generally operated in the air, which is different from other ground-operated cranes. In the air operation, there is a separate small operation room under the crane, while in the ground operation, the operator uses a remote control.
Hot Tags: double girder overhead crane manufacturers China, manufacturers, suppliers, customized, quotation, offer, price
Send Inquiry
You Might Also Like