Safety Rules For Gantry Cranes

           Gantry Crane drivers must be fully familiar with the performance of the operation of lifting machinery and equipment, and proficiency in the operation of the technology.Gantry Crane

           1 check before Crane: must check all electrical equipment is intact, electrical equipment parts of the insulation should meet the requirements of the mechanical transmission connection is reliable, the lubrication part of the oil, whether there are obstacles on both sides of the track. Check the crane for missing tools or other items to prevent the machine from falling or damaging the machine.

           2 drive: Put all control handles on "0 bit". Plug the total fuse safety device, close the total knife switch. Press the bell a long time before starting and give a warning signal that the crane has power. Press the starter button to close the total switch. A warning signal that the crane is about to start. The operation controller eases the steady shift-by-stall start. When the reverse operation, must wait for the mechanism to completely stop before allowing. Gantry Crane Lifting heavy weight operation, the weight must lift up the mobile line above the maximum barrier above 0.5 meters, strictly prohibited in the head over. The driving and parking must be closely cooperated with the hoisting conductor, and in the operation of the crane, any person who sends a stop signal must stop immediately.Gantry Crane

           3 after work: After the completion of the work will be parked in the crane at the designated location, lifting hook to the highest position, a good clip rail device. Shift the control handle smoothly to "0 bit". Press "Stop" to disconnect the power switch. Press the General knife switch and remove the fuse when necessary.Gantry Crane