- we provide 100t bridge girder launcher crane.If you have other needs, you can contact us and we will respond
- We provide 100t gantry crane bridge construction,If you have other needs, you can contact us and we will respond
- Bridge girder erection gantry craneRead More
- girder launching erection gantry craneRead More
- Road launcher girder craneRead More
- Dowell overhead crane electrical parts
The design is always up to the following requirements;
1.The manufacturing of crane should be in accordance with ruls of JB/T3695/1994.
2.Bus bar rail joint should be straight and smooth.
3.All outer shell of the crane should be...Read More
- Electric overhead crane parts During the design process: 1.Resistance insulation to the earth of each electric circuit in all electric control equipment is usually not less than 0.8MΩ. 2.All electrical metal shell should be connected to the ground. 3.Crane's safety...Read More
- Cross Track Electric overhead crane 10 ton Widely applied in multi-span workshop and other occasions. The following is the general drawing for reference: While the main technical parameters are as follows:Read More
- The rails should be laid immediately after the beam is placed, and the bridge machine can continue to work forward. The latter two types of bridge erectors generally hoist the pre-assembled rails in place so that the girders do not cause delays due to the railing. In addition...Read More
- The lifting trolley adopts a concave structural frame (as shown in the upper right figure). The running gear adopts the chain drive traction, and the heavy object transporter bears the weight. The hoisting mechanism of the lifting trolley is driven by a motor, and the...Read More
- Factory highway railway 140 tons 160 tons 180 tons 200 tons of bridge Bridge erector: bridge erector is a device for placing prefabricated beams onto prefabricated piers.The bridge erector belongs to the category of crane, because its main function is to lift the beam piece,...Read More
- Double cantilever bridge machine One of the bridge construction machinery, this type of Soviet Union was used earlier. When introduced in 1948, the front and rear arms were made of steel plate beams, and the hoisting weight was 45 tons and 80 tons. In the 1950s, the arms were...Read More